In Normal time display, press and release
[▼/WAVE/°C/°F]
to interchange the
temperature unit between degree Celsius and degree Fahrenheit.
13
15
10 SWITCH TEMPERATURE UNIT
11 USE THE WALL MOUNT
• Both the wall clock and outdoor transmitter have a tabletop and wall
mounting structure.
• For the clock, use the recessed hole/holes on at the back of the clock to hang it
or pull out the back-stand for tabletop use.
• For the transmitter, use the hang hole or place the unit in an area protected from
direct rain.
12 SPECIFICATIONS
Indoor
Outdoor
Power
Dimension
• Temperature Range: 32.0°F to 122.0°F (0.0°C to 50.0°C)
• Temperature Range: -58.0°F to 158.0°F (-50.0°C to 70.0°C)
Note: Temperature below -4°F require Lithium batteries in
the outdoor sensor
• Distance: 330ft (100m)
• Transmission frequency: 433MHz
•
Wall clock: 3 x AA 1.5V, alkaline batteries
• Sensor: 2 x AAA
1.5V, alkaline batteries
• Wall clock: 8.90 x 7.38 x 0.96 inches
• Sensor: 1.57 x 4.09 x 1.02 inches
13 IMPORTANT PLACEMENT GUIDELINES
• Mounting under an eave or deck rail works well.
• Mount the remote sensor on the North side where to prevent the sun from
causing incorrect readings
• Be sure the outdoor sensor is mounted vertically to drain moisture.
• Mount at least 6 feet in the air for a strong RF (radio frequency) signal.
• To prevent wireless interference, place units at least 3 ft (0.9 m) away from
electronic devices (TV, computer, microwave, radio, etc.).
To Next Page
Loading...