8
6.1 SETTING ORDER
1. RCC On/Off
4. Year
7. 12/24 Hour Format
10. End of Setting
3. DST On/Off
6. Day
9. Minute
2. Time Zone
5. Month
8. Hour
6 TIME SETTING
During atomic clock reception, press and release [▼/WAVE/°C/°F] key over 3
seconds to exit atomic clock reception.
For information about WWVB, visit
www.nist.gov/pml/div688/grp40/wwvb.cfm
In the Normal time display, press and hold [SET] for over 3 seconds to enter
setting mode. Press and release [▲/ ] or [▼/WAVE/°C/°F] to adjust the
values. Press and hold [▲/ ] or [▼/WAVE/°C/°F] over 3 seconds to
adjust the values quickly. Press and release [SET] to confirm and move to the
next item.
1.) Press and hold [SET] button entering the settings. RCC ON flashes. Press
[▲/ ] or [▼/WAVE/°C/°F] to set RCC on/off. Press [SET] to select
Time Zone.
Note: If RCC OFF is selected, you will skip Time Zone and DST settings and move
year setting.
2.) When Zone EST icon flashes, press [▲/ ] or [▼/WAVE/°C/°F] button
to set a different time zone (EST=Eastern, CST=Central, MST=Mountain,
PST=Pacific, AKT=Alaska, HST=Hawaii, AST=Atlantic, NST=Newfoundland).
Press [SET] to select DST on/off.
3.) When DST ON flashes, press [▲/ ] or [▼/WAVE/°C/°F] button to
select DST on/off. Press [SET] to select Year.
4.) When Year flashes, press [▲/ ] or [▼/WAVE/°C/°F] to adjust the
year. Press [SET] to select Month.
5.) When Month flashes, press [▲/ ] or [▼/WAVE/°C/°F] to adjust the
month. Press [SET] to select date.
6.) When Date flashes, press [▲/ ] or [▼/WAVE/°C/°F] to adjust the
date. Press [SET] to select the 12/24 hour format.
15
15
15
14
14
11
11
11
11
11
11
11
11
11
1514
15
14
15
14
15
14
15
14
15
14
To Next Page
Loading...