LDP-9208D/9224DF/9240D User Guide
47
7.
R
EMOTE
S
YSTEM
A
CCESS
7.1 Direct Inward System Access (DISA)
DISA (Direct Inward System Access) allows remote users to gain
access to the system’s resources (remote users may be required
to enter an Authorization Code). The system will recognize
remote user dialed inputs (call other stations, place calls over
CO/IP lines, review voice mails, etc).
To access system resources remotely:
•
Call the system’s DISA facility,
•
Await answer and dial your authorization code (station
number and password),
•
Dial “*” for end mark,
•
Dial as needed for the desired system resource.
7.2 Mobile Phone Extension
When away from your desk or office you can place and receive
calls on a registered mobile phone. You may need to activate
the Mobile Phone Extension feature and assign the Mobile
Phone number.
To use Mobile extension, you have to admin ‘Mobile Extension
Table (PGM 236)’.
1) PGM Auth: Enable.
2) Usage: Enable.
For more admin options, you ask your system administrator.
This feature is only effective with an ISDN/VOIP CO line.
To register a mobile phone number:
• Press the TRANS/PGM button,
• Dial 37,
• Dial the mobile phone number,
• Press the HOLD/SAVE button.
To activate a registered mobile phone:
• Press the TRANS/PGM button,
• Dial 38,
• 1 to activate, 0 to deactivate,
To Next Page
Loading...
Need help?
General
