LG 150 - Backlight; Power Save Mode; Status Light

21
Settings
1.8 Backlight
Allows you to set the duration for illuminating the
backlight. Main LCD and Keypad are set separately.
1.8.1 Main LCD
1. Press , , , , .
2. Choose a sub-menu, then press .
Dim Only/ 8 seconds/ 15 seconds/ Flip Open
3. Choose a setting, then press .
1.8.2 Keypad
1. Press , , , , .
2. Choose a setting, then press .
Always Off/ 8 seconds/ 15 seconds/ 30 seconds
1.9 Power Save Mode
Display and buttons are lit for a designated length of
time, allowing your convenience to use your phone in
the dark.
1. Press , , , .
2. Use to select Off/ 30 seconds/ 60 seconds/
90 seconds, then press .
1.0 Status Light
Shows the status on your phone by blinking the light.
1. Press , , , .
2. Use to set to On or Off, then press .
Note
If an amount of time is set for the timer option, the time
starts after the last key was pressed.