What to do if my LG 19EN33T says 'OUT OF RANGE'?
If your LG Monitor displays an "OUT OF RANGE" message, it means the signal from your PC's video card is outside the monitor's supported horizontal or vertical frequency range. Refer to the 'Specifications' section of the manual to reconfigure your display settings accordingly.
How to stop the screen from blinking on my LG 19EN33T?
To stop the screen from blinking on your LG Monitor, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
How to fix an LG 19EN33T when no image appears?
If no image appears on your LG Monitor, ensure the power cord is properly connected to the outlet and that the monitor is turned on by pressing the Power button. Also, adjust the brightness and contrast settings. If the monitor is in power saving mode, try moving the mouse or pressing a key. Finally, check if your PC is turned on.
How to resolve horizontal noise on LG Monitor?
If you see horizontal noise or characters that aren't clear on your LG monitor, first, press the AUTO button to automatically adjust the display image. If that doesn't work, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution, or fine-tune the display image settings. Also, ensure that your color setting is higher than 24 bits (true color).
Why is my LG 19EN33T screen blinking?
If your LG Monitor screen is blinking, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
General| Resolution | 1366 x 768 |
|---|---|
| Panel Type | TN |
| Brightness | 200 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Connectivity | VGA |
| Aspect Ratio | 16:9 |
| Screen Size | 18.5 inches |
| Viewing Angle | 90° (H) / 65° (V) |
| Power Consumption | 18 W |
To Next Page
