PREPARATION
When not using the desk-type stand.
(26LG30**)
When installing the wall-mounted unit, use the protection cover for desk-type stand installation.
Insert the PROTECTION COVER into the TV until clicking sound is produced.
(Only 19/22LG30**)
When installing the wall-mounted unit, please follow the installation steps as in the pictures below.
Step 1: Pull out the CABLE MANAGEMENT.
CABLE MANAGEMENT
Step 2: Unscrew these 3 screws.
Step 3: Take out the HINGE ASSEMBLY.
HINGE ASSEMBLY
Step 4: Insert the PROTECTION COVER into the TV.
EXTERNAL EQUIPMENT SETUP
To Next Page
Loading...
