Picture Improvement Technology
Flesh Tone
Flesh tone will be more natural.
Adaptive Luma Control
Automatically adjust the brightness and contrast after analyzing the input signal.
Noise Reduction
Removes interference up to the point where it does not damage the original picture.
PICTURE
Aspect Ratio 16:9
VividPicture Mode
50
100
70
70
Advanced Control
OK Move RETURN
Brightness
Contrast
Colour
Sharpness
100
Backlight
Colour Temperature Cool
Advanced Control
Flesh Tone Off
On
Medium
Adaptive Luma Control
Noise Reduction
Move RETURN
Select PICTURE.
Select Advanced Control.
Select Flesh Tone, Adaptive Luma Control or Noise Reduction.
Select your desired source.
NOTE
► You can only select Flesh Tone : To adjust the esh coluors: On and Off.
► You can only select Adaptive Luma Control : To adjust the luminance of the picture: On and Off.
► You can only select Noise Reduction : To reduce the appearance of digitizing error caused by the
compression: Medium, Strong, Off and Low.
• Press the MENU or EXIT button to return to normal TV viewing.
• Press the RETURN button to move to the previous menu screen.