PREPARATION
Front Panel Controls
■
Image shown may differ from your TV.
■
If your TV has a protection lm attached, remove the lm and then wipe the TV with a polishing cloth.
LCD TV Models : (Only 26LG30**)
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
Attaching the TV to a desk (Only 26LG30**)
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or
damaging the product. Use only an attached screw.
WARNING
►
To prevent TV from falling over, the TV should be securely attached to the oor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
Stand
Desk
1-Screw
(provided as parts of the product)
To Next Page
Loading...
