VCR Setup
■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.
■ If 4:3 picture format is used for an extended period, the xed images on the sides of the screen may remain visible.
Connecting with a RF cable
Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.
Connect the antenna cable to the ANT IN socket of the VCR.
Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.
Antenna
Wall Jack
20
EXTERNAL EQUIPMENT SETUP
To Next Page
Loading...
