Connecting with a S-Video cable
Connect the S-VIDEO output of the VCR to the S - VIDEO
input on the TV. The picture quality is improved; compared
to normal composite (RCA cable) input.
Connect the audio outputs of the VCR to the AUDIO input
jacks on the TV.
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
Select AV3 (S-Video) input source using the INPUT button
on the remote control.
Other A/V Source Setup
Connect the AUDIO/VIDEO jacks between TV and external
equipment. Match the jack colours. (Video = yellow, Audio
Left = white, and Audio Right = red)
Select AV3 (CVBS) input source using the INPUT button on
the remote control.
Operate the corresponding external equipment. Refer to
external equipment operating guide.
AV IN 3
H/P
S-VIDEO
HDMI IN 2 PCMCIA CARD SLOT
VIDEO
R L
AUDIO
AV IN 3
H/P
S-VIDEO
HDMI IN 2 PCMCIA CARD SLOT
VIDEO
R L
AUDIO
Camcorder
Video Game Set
22
EXTERNAL EQUIPMENT SETUP
To Next Page
Loading...
