12
ENG
ENGLISH
WATCHING TV
Managing programmes
Automatically setting up pro-
gramme
Use this to automatically find and store all avail-
able programmes.
When you start auto programming, all previously
stored service information will be deleted.
1
Press MENU and the Navigation buttons to
scroll to SETUP.
2
Press the Navigation buttons to scroll to
Auto Tuning.
3
Select To Set and press the Navigation buttons
to scroll to System. Select your desired
system.
4
Press the Navigation buttons to scroll to
Storage From and select the initial programme
number.
5
Press the Navigation buttons to scroll to
Search and select To Start to begin auto
tuning.
The TV scans and saves available pro-
grammes automatically.
6
When you return to the previous menu, press
MENU.
Manually setting up programme
Manual Tuning lets you manually tune and arrange
the stations in whatever order you desire.
To store another programme, repeat steps 3
to 11.
1
Press MENU and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Storage.
4 Press the Navigation buttons or Number but-
tons to select the desired programme number.
5 Press the Navigation buttons to scroll to
System.
6 Press the Navigation buttons to scroll to
TV System menu.
7 Press the Navigation buttons to scroll to
Band.
8 Press the Navigation buttons to scroll to
V/UHF or Cable.
9 Press the Navigation buttons to scroll to
Channel.
Press the Navigation buttons and then select
the desired programme number with the Navi-
gation buttons or Number buttons.
10 Press the Navigation buttons to scroll to
Search.
11 Press the Navigation buttons to scroll and start
searching.
12 Press the OK to store it.
13 When you return to the previous menu, press
MENU.
NOTE
To Next Page
Loading...
