To Next PageTo Next PageWhy does my LG 24BN650Y say out of range?
If your LG Monitor displays no image, it might be due to the signal from your PC being out of the display's frequency range. To fix this, see the 'Specifications' section of this manual and configure your display again.
How to fix no image on LG Monitor?
If no image appears on your LG Monitor, first, ensure the power cord is correctly connected to the power outlet. Next, press the Power button. Also, verify the signal cable between your PC and the monitor is properly connected; reconnect it if necessary. If the monitor is in DPM with the power LED off, press the DC button twice to wake the screen. You can also unlock the OSD controls by going to the OSD lock menu and turning the settings off. If the signal from the PC is out of the horizontal or vertical frequency range, refer to the 'Specifications' section of the manual to configure your display again.
What to do if no image appears on my LG Monitor?
If your LG Monitor displays no image, first ensure the power cord is properly connected to the power outlet and that the power button is pressed. Also, check the signal cable between your PC and the monitor to make sure it's correctly connected. If the monitor is in DPM with the power LED off, press the DC button twice to wake up the screen. If the signal from your PC is out of the display's frequency range, consult the 'Specifications' section of the manual to reconfigure your display. You can also unlock the OSD controls by entering the OSD lock menu and changing items to off.
Why is my LG 24BN650Y display image incorrect?
If your LG Monitor's display image is incorrect, ensure the signal cable is properly connected, tightening it with a screwdriver if needed. Also, ensure the video card is correctly inserted in its slot. Set the color setting higher than 24 bits (true color) via Control Panel settings, and change the resolution to the recommended setting.
How to fix incorrect display image on LG 24BN650Y Monitor?
To correct an incorrect display image on your LG Monitor, first ensure the signal cable is properly connected, tightening it with a screwdriver if needed. Then, verify that the video card is correctly inserted in its slot. Next, check the color settings in Control Panel ? Settings and set it higher than 24 bits (true color). Finally, confirm that the screen is not set to interlace mode; if it is, change it to the recommended resolution.
General
