LG 24BP750C User Manual (English)

Questions and Answers:

B
Barbara SchroederJul 28, 2025
Why is nothing displayed on my LG 24BP750C Monitor screen?
- M
  Michelle KeyJul 29, 2025
  There could be several reasons why your LG Monitor screen is blank. First, ensure the power cord is securely plugged into the power outlet and that the power cable is properly connected; then press the power button. Also, verify that the correct input is enabled in the monitor's settings under the Input section. Another possibility is that the signal cable between your PC and the monitor is either missing or not properly connected, so check the cable and reconnect it securely. Finally, the signals from your PC's graphics card might be outside the monitor's supported frequency range. Consult the Product Specification section of the manual to set the appropriate frequency.
S
Sandra ThompsonAug 2, 2025
Why is there no sound from the headphone port on my LG 24BP750C?
- J
  jessicahortonAug 2, 2025
  If you're not getting any sound from the headphone port on your LG Monitor, first ensure that the headphone connections are properly made. If the connection is good, try increasing the volume. Also, make sure the audio output of your PC is set to the monitor you are using. Note that these settings may differ depending on your computer's operating system.
B
brianrichardsonAug 7, 2025
What to do if my LG 24BP750C Monitor screen display is unstable and shaky?
- D
  Diana BlairAug 7, 2025
  If your LG Monitor screen is unstable or shaky, and you're using HDMI 1080i 60/50 Hz (interlaced) resolution, the screen might be flickering. Try changing the resolution to 1080p or the recommended resolution. Also, not setting the graphics card to the optimal resolution may result in blurred text, a dimmed screen, a truncated display area, or misalignment of the display. The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the graphics card.
M
Melissa SmithAug 12, 2025
How to fix the "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message on LG 24BP750C Monitor?
- B
  Bradley DavidsonAug 13, 2025
  To resolve the "Unrecognized monitor" message on your LG Monitor, first install the display driver. Also, verify that your graphics card supports the Plug and Play function.
C
Chad SawyerAug 17, 2025
What to do if some features are disabled on my LG 24BP750C?
- J
  Jeremy BlairAug 18, 2025
  If some features are disabled on your LG Monitor, it's possible that the OSD (On-Screen Display) is locked. To unlock it, disable OSD Lock in the General settings.
N
Nancy HooverAug 22, 2025
Why does image sticking occur even when the LG monitor is turned off?
- S
  Sean JacobsAug 22, 2025
  Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image. To extend the lifetime of the LG monitor, use a screensaver.

LG 24BP750C Specifications

General

Screen Size	24 inches
Resolution	1920 x 1080 (Full HD)
Panel Type	IPS
Refresh Rate	75 Hz
Brightness	250 cd/m²
Contrast Ratio	1000:1
Aspect Ratio	16:9
Built-in Speakers	Yes
VESA Mount	100 x 100 mm
Color Gamut	sRGB 99%
Response Time	5 ms
Connectivity	HDMI, USB-C, DisplayPort
Viewing Angle	178° (horizontal), 178° (vertical)
Power Consumption	25 W