LG 26LB7 Series - Software Update (in Digital Mode Only)

52
WATCHING TV / PROGRAMME CONTROL
WATCHING TV /PROGRAMME CONTROL
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Software Update
G
Diagnostics
CI Information
Off
On
1
32
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Software Update
Diagnostics
CI Information
PICTURE O
AUDIO O
TIME O
OPTION O
SCREEN O
Prev.
MENU
Move
SETUP O
Software Update means software can be downloaded through
the digital terrestrial broadcasting system.
SOFTWARE UPDATE
(IN DIGITAL MODE ONLY)
Press the MENU button and then
D
or
E
button to
select the SETUP menu.
Press the
G
button and then
D
or
E
button to select
Software update.
Press the
G
button and then
D
or
E
button to select
Off or On.
• If you select On, a user confirm message box will be
displayed to notify that new software is found.
Press the EXIT button to return to normal TV viewing.
* When setting “Software Update”
Occasionally, a transmis-
sion of updated digital
software information will
result in the following
menu on the TV screen.
Select the YES using the
F
or
G
button and when
you see the following
picture.
After Software Update is
completed, the System
takes about one minute to
restart.
- During Progress of Software Update,
please note the following:
• The power of the set must not be interrupted.
• The set must not be switched off.
• The antenna must not be disconnected.
• During this time, you should not switch off
the power to the set.
• At this time, you should not work power
On/Off.
• After Software Update, you can confirm the
updated software version in Diagnostics
menu.
1
2
3
4
OK
MENU EXIT
GUIDE
RATIO
789
0
Q.VIEW LIST
VOL PR
SLEEP SUBTITLE UPDATE
BACK
FAV
INFO i
*
OK
EXIT
VOL PR
GUIDE
BACK
MENU
123
MUTE
INFO i
FAV