- 14 -
(8) Click OK button at the "edit window"
(9) Under Downloading process
(10) If download is failed, for example "No acknowledge
from slave". Execute download again from(1)
4.1.2.2 Download method 2 (AV Plate Ass’y)
(1) Push S/W ‘ON" (connect SCL to GND using switch
at Jig ) and connect the download jig to D-sub jack
(2) Supply the power (Stand-by 5V) and wait for 3
seconds.
(3) Push the S/W off (Disconnect SCL to GND using
switch at jig)
(4) Execute ‘Download.vi2c’ program in PC, then a main
widow will be opened.
(5) Double click the blue box and confirm "Bootloader
Version" as 40.
Push S/W
Double click
Push S/W
To Next Page
Loading...
