- 6 -
1. Application range
This specification is applied to LP61C chassis.
2. Requirement for Test
Testing for standard of each part must be followed in below
condition.
(1) Temperature : 25°C±5°C(77±9°F), CST : 40±5
(2) Humidity : 65%±10%
(3) Power : Standard input voltage (AC 100-240V, 50/60Hz)
*Standard Voltage of each products is marked by models
(4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(5) The receiver must be operated for about 20 minutes prior
to the adjustment.
3. Test method
3.1 Performance : LGE TV test method followed
3.2 Demanded other specification
Safety : CE, IEC Specification
EMC : CE, IEC
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
4. Electrical Specification
4.1 Module Specification
4.1.1 General Specification(26/32/37" LCD MODULE)
No Item Specification Remark
1. Display Screen Device 26/32inch wide Color Display Module LCD
2. Aspect Ratio 16:9
3. LCD Module 26/32 TFT WXGA LCD MAKER : AUO/CMO/LPL
4. Operating Environment 1) Temp. : 0 ~ 40 deg LGE SPEC
2) Humidity : 0 ~ 85%
5. Storage Environment 3) Temp. : -20 ~ 60 deg
4) Humidity : 0 ~ 85 %
6. Input Voltage AC100 ~ 240V, 50/60Hz
7. Power Consumption Power on (White) Volume: 1/8 volume of sound distortion point
≤ max 160W (32")
≤ max 130W (26")
St-By (Red) : 1.0 W
To Next Page
Loading...
