36
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
In standby mode to turn TV on, press the
rr
/ I, INPUT or P
D
or
E
(or P )button on the TV or
press the POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on.
2
1
Initializing setup
Note:
a. It will automatically disappear after approx. 40 seconds unless a button is pressed.
b. Press the RETURN button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might not
work, depending on the DTV broadcasting environment.
d. "Home” mode is the optimal setting for home environments, and is the TV's default mode.
e. "In-Store" mode is the optimal setting for store environments. If a user modifies image quality data,
“In-Store” mode initializes the product to the image quality set by us after a certain period of time.
(Only 26/32/37LG3
***
, 32/42/47LG5
***
, 32LG6
***
, 42/47LG60
**
)
f. "In-Store" mode is an optimal setting for a display at stores. “In-Store” mode initializes the product to
the image quality set and operates TruMotion Demo after a certain period of time.
When used at home, select “Home” mode.
(Only 42/47LG61
**
, 47/52LG65
**
, 42/47/52LG7
***
)
g. The mode (Home, In-Store) can be changed by executing Factory Reset in the OPTION menu.
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
SSeelleecctt MMooddee
,
TTiimmee ZZoonnee
,
AAuuttoo pprrooggrraammmmee ttuunniinngg
.
- When your TV is turned on, you will be able to use its features.
PROGRAMME SELECTION
Press the
PP
or NUMBER buttons to select a programme
number.
1
VOLUME ADJUSTMENT
Press the
++
or
--
button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
++
or
--
button.
1
To Next Page
Loading...
