11
ENG
ENGLISH
INSTALLATION MENU
Pro:Centric (LT560H Only)
1
Use the v or ^ button to select the
Pro:Centric
option and then press the
OK
button.
2
Make appropriate adjustments.
(1) Mode
Sets whether or not enable Pro:Centric and the
service method.
You can set to Off, Flash or GEM using the
< or > button. The default value is Off; when it
is set to Off, all the sub items are disabled.
(2) Receive Data
Sets Enable or Disable. When it is set to
Disable, all the sub items are disable.
(3) RF Type
Sets the RF type to Air or Cable.
(4) Channel Number
Sets the number of physical channel, The
default value is 2 (Range: 1 - 135).
Pro:Centric
Mode
Receive Data
RF Type
Channel Number
OK
◀
Off
▶
Enable
Air
2
Previous
ꕣ
Configuration setup
1
Select RCU (Remote Control Unit)
It is a mode to set whether to use Select
RCU or not. When ‘Select RCU’ is set to
‘Enable’, You can adjust the ‘Number of
RCU’ menu.
2
Number of RCU
It is a mode to set the Number of RCU.
Number of RCU value range 1 ~ 9 (When
‘Select RCU’ is set to ‘Enable’)
Number of RCU value range 0 (When ‘Select
RCU’ is set to ‘Disable’)
* RCU (Remote Control Unit): It is special RCU
that operates only a set number of RCU in the
TV.
3
Splash Offset Time
Sets the splash image display time.
The time can be set to between 0 and 10
seconds.
4
USB Auto Playback (LT360C, CS460C Only)
Select Enable to use USB Auto Playback
functionality.
This function makes TV to search and play
the USB's movie files located at the first slot
and partition and root(top) directory if USB is
plugged-in.
Configuration Setup
Select RCU
Number of RCU
Splash Offset Time
USB Auto Playback
OK
Enable
1
0
Disable
To Next Page
Loading...
Need help?
General
