LG 26LX1D - Page 105

105
Reference
09. Color
(Command2:i)
G
To
adjust
the screen color.
You can also
adjust
color in the Video menu.
Transmission
Data Min:0~Max:64
?
Refer to 'Real data
mapping'.
See
page
104.
[k][i][ ][Set ID][ ][Data][Cr]
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
10. Tint
(Command2:j)
G
To
adjust
the screen tint.
You can also
adjust
tint in the Video menu.
Transmission
Data Red:0~Green:64
?
Refer to 'Real data
mapping'.
See
page
104.
[k][j][ ][Set ID][ ][Data][Cr]
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
13. Remote Control Lock Mode
(Command2:m)
G
To lock the remote control and the front
panel
controls on
the set.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: Lock off 1: Lock on
[m][ ][Set ID][ ][OK][Data][x]
14. PIP/POP/Twin Picture
(Command2:n)
G
To control the PIP
(Picture-in-Picture)/POP/Twin picture.
You can also control the PIP/POP/Twin
picture using
the
PIP button on the remote control.
Transmission
Data 0: PIP off
1: PIP
2: Twin Picture
5: POP
[k][n][ ][Set ID][ ][Data][Cr]
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
G
To
adjust
the screen
sharpness.
You can also
adjust sharpness
in the Video menu.
Transmission
11.
Sharpness (Command2:k)
Data Min: 0
~
Max: 64
?
Refer to 'Real data
mapping'.
See
page
104.
[k][k][ ][Set ID][ ][Data][Cr]
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
12. OSD Select
(Command2:l)
G
To select OSD
(On
Screen
Display)
on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: OSD off 1: OSD on
[l][ ][Set ID][ ][OK][Data][x]
15. PIP Position
(Command2:q)
G
To select sub
picture position
for PIP.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0:
Right
down on screen
1: Left down on screen
2: Left
up
on screen
3:
Right up
on screen
[q][ ][Set ID][ ][OK][Data][x]
16. Treble
(Command2:r)
G
To
adjust
treble.
You can also
adjust
treble in the Audio menu.
Transmission
Data Min: 0
~
Max: 64
?
Refer to 'Real data
mapping'.
See
page
104.
[k][r][ ][Set ID][ ][Data][Cr]
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
18. Balance
(Command2:t)
G
To
adjust
balance.
You can also
adjust
balance in the Audio menu.
Transmission
Data Min: 0
~
Max: 64
?
Refer to 'Real data
mapping'.
See
page
104.
[k][t][ ][Set ID][ ][Data][Cr]
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
17. Bass
(Command2:s)
G
To
adjust
bass.
You can also
adjust
bass in the Audio menu.
Transmission
Data Min: 0
~
Max: 64
?
Refer to 'Real data
mapping'.
See
page
104.
[k][s][ ][Set ID][ ][Data][Cr]
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]