LG 27EN43V-B User Manual (English)

Questions and Answers:

M
Matthew BrownAug 7, 2025
How to fix an LG 27EN43V-B Monitor when no image appears?
- E
  Eric StricklandAug 7, 2025
  If your LG monitor displays no image, ensure the power cord is properly connected to the outlet and that the monitor is turned on by pressing the power button. Also, adjust the brightness and contrast settings. If the monitor is in power saving mode, move the mouse or press a key on the keyboard. Verify that the PC is turned on. If the signal from the PC is out of the monitor's frequency range, check the 'Specifications' section of this manual and configure your display again. Also, the monitor goes to DPM mode when it is on 'No-Signal' in 5 minutes.
R
Robert CastanedaAug 11, 2025
How to correct display position on LG 27EN43V-B Monitor?
- J
  jennifer02Aug 11, 2025
  To correct the display position on your LG monitor, press the AUTO button to automatically adjust your display image to the ideal setting.
F
Francisco MayAug 16, 2025
What does "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" mean on LG Monitor and how to solve it?
- B
  Brandy MartinAug 16, 2025
  If you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on your LG monitor, install the display driver from the CD (or diskette) that came with your display. Also, ensure that the video card supports Plug&Play function.
T
Teresa WilliamsAug 20, 2025
Why is my LG 27EN43V-B screen color mono or abnormal, and how to fix it?
- J
  Jennifer CallahanAug 20, 2025
  If your LG monitor's screen color is mono or abnormal, check that the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, ensure the video card is correctly inserted in its slot. Finally, verify that the color setting is higher than 24 bits (true color) in Control Panel ? Settings.
C
Caleb PowellAug 25, 2025
How to fix horizontal noise or unclear characters on LG 27EN43V-B Monitor?
- B
  Barbara SmithAug 25, 2025
  To resolve horizontal noise or unclear characters on your LG monitor: 1. Press the AUTO button to automatically adjust the display image. 2. Check Control Panel ? Display ? Settings to adjust the display to the recommended resolution or adjust the display image. 3. Set the color setting higher than 24 bits (true color).
C
Cassandra MartinezAug 28, 2025
How to unlock OSD on LG 27EN43V-B?
- M
  Mrs. Joyce KingAug 28, 2025
  To unlock the OSD controls on your LG monitor, push the MENU button for several seconds until the message “OSD UNLOCKED” appears.
T
tonya55Sep 1, 2025
How to remove vertical bars or stripes on LG Monitor screen?
- H
  hullangelaSep 1, 2025
  To remove vertical bars or stripes on your LG monitor screen, press the AUTO button to automatically adjust your display image to the ideal setting.

LG 27EN43V-B Specifications

General

Screen Size	27 inches
Resolution	1920 x 1080 (Full HD)
Panel Type	IPS
Refresh Rate	60 Hz
Response Time	5 ms
Brightness	250 cd/m²
Contrast Ratio	1000:1
Aspect Ratio	16:9
Color Gamut	72% NTSC
Connectivity	HDMI
Viewing Angles	178° (H) / 178° (V)
Power Consumption	30W (Typical)