To Next Page

To Previous Page

ENGLISH

Installing on a Table

• Lift the monitor and place it on the table in an upright position. Place the monitor at least 100mm away from

the wall to ensure sufficient ventilation.

100 mm

CAUTION

• Unplug the power cord before moving or installing the monitor. There is risk of electric shock.

• Make sure to use the power cord that is provided in the product package and connect it to a grounded power

outlet.

• If you need another power cord, please contact your local dealer or the nearest retail store.

Adjusting the Angle

1 Place the monitor mounted on the stand base in an upright position.

2 Adjust the angle of the screen.

24ML600M 24ML60MP 24ML600S 24ML60SP

The angle of the screen can be adjusted forward or backward from -2° to 15° for a comfortable viewing

experience.

27ML600M 27ML60MP 27ML600S 27ML60SP 27MN60T

The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing

experience.

WARNING

• To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as

illustrated below.

• Be careful not to touch or press the screen area when adjusting the angle of the monitor.

Other manuals for LG 27MN60T

Questions and Answers:

Need help?

Do you have a question about the LG 27MN60T and is the answer not in the manual?

General