Need help?Do you have a question about the LG 27MK60TM and is the answer not in the manual?
General| Screen Size | 27 inches |
|---|---|
| Panel Type | IPS |
| Resolution | 1920 x 1080 (Full HD) |
| Refresh Rate | 75 Hz |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178° (H) / 178° (V) |
| Color Gamut | sRGB 99% |
| VESA Mount | Yes (100 x 100 mm) |
| Response Time | 5 ms |
| Connectivity | HDMI, D-Sub |
Key safety warnings and precautions for technicians and users.
Guidelines for safe servicing, including isolation transformers and component handling.
Procedure for checking AC leakage current with the unit powered on.
Procedure for checking AC leakage current with the unit powered off.
Overview of general technical specifications for the monitor models.
Detailed timing parameters for analog video input signals.
Detailed timing parameters for HDMI video input signals.
Supported factory preset modes for HDMI input.
Detailed specifications for the 22MK600 LCD panel.
Detailed specifications for the 24MK600 LCD panel.
Detailed specifications for the 27MK600 LCD panel.
Conditions required for accurate panel performance measurements.
Scope of the manual and general adjustment designations.
Steps for checking and calibrating the main PCB.
Detailed procedure for Analog-to-Digital Converter calibration.
Procedure for adjusting V-Com level to minimize screen flicker.
Steps to adjust preset color temperatures for display accuracy.
Alternative methods and specifications for 6500K color adjustment.
Procedure to confirm and reset user color settings.
Information regarding the HDCP 1.4 key implementation in the scaler.
Procedure for checking and calibrating white balance before factory calibration.
Procedure to check Dynamic Power Management (DPM) operation.
Final checks and factory reset procedures before shipping.
Initiating communication via I2C protocol.
Structure of commands used for monitor adjustment.
Specific commands for adjusting screen parameters.
Procedure for writing data to the EEPROM.
List and explanation of EEPROM write commands.
Procedure for reading data from the EEPROM.
Procedures for writing and reading EDID data.
Critical safety warnings related to parts shown in the exploded view.
Step-by-step instructions for disassembling the monitor stand and base.
Further steps for disassembling the stand-body, back cover, and middle cabinet.
Final steps for disassembling DMS, PCBs, and cables.
Diagnostic flowchart for power-related issues.
Diagnostic flowchart for display-related issues.
Diagnostic flowchart for D-sub no video issues.
Diagnostic flowchart for HDMI no video issues.
To Next Page
