4.3 DPM Operation check
■ Measurement Condition: 100~240V@ 50/60Hz
1) Set Input to D-Sub, HDMI
2) Turn off the source device.
3) Check DPM operation refer to the below table.
Operating Condition
Sync (H/V)
or Video
EUT
(MSPG6100)
LED(SET) Wattage(W)
Sleep mode Off/Off Off Off 0.3W
Off mode - -
Off
0.3W
DC Switch Off
5. Shipping condition
Æ Make sure to do FACTORY RESET at the final process.
No. Item Content& Outgoing Condition
비고
2 Outgoing Condition Quick Settings Brightness 100
Contrast 70
Volume 30
Input Input List HDMI1
Aspect Ratio Full wide
Picture Picture Mode Custom
Picture Adjust Brightness 100
Contrast 70
Sharpness 50
Super Resolution+ Off
Black Level Depending on input signal
(RGB: High)
(YUV: Low)
DFC Off
Game Adjust Response Time Fast
FreeSync Off
Black Stabilizer 50
Cross Hair Off
Color Adjust Gamma Mode 2
Color Temp Custom
Red 50
Green 50
Blue 50
Configuration Adjust Horizontal 50
Vertical 50
Clock 50
Phase 50
Resolution Off
Picture Reset No
General Language Depend on the sale region
Smart Energy Saving Low
Power LED Off
Automatic Standby Off(EU/EK/PD/EW/MA,4H)
OSD Lock Off
- 13 - Copyright © 2018 LG Electronics Inc. All rights reserved.
Only training and service purposes
To Next Page
Loading...
