23
ENG
ENGLISH
-Auto Configuration
1
To view the
OSD menu
, press the
joystick button
at the
bottom of the monitor and then enter the
Menu
.
2
Go to
Auto Configuration
by moving the joystick.
3
Configure the options following the instructions that
appear in the bottom right corner.
4
To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
5
If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Auto Configuration Description
Do you want to Auto Confuguration?
Yes Operate the Auto configuration for optimal display in D-SUB.
Cancel Cancel the select.
Do you want to Auto Confuguration?
NOTE
y
This function will be enable only in analog input.
To Next Page
Loading...
