LG 28MQ780

26
ENGLISH
[General]
[Settings] > [General]
• [Language]: Sets the menu screen to the desired language.
• [USB Selection]:Select the USB upstream cable connection port to use USB hub of the monitor.
• [SMART ENERGY SAVING]: Conserve energy by using luminance compensation algorithm.
- [High]: Saves energy using the high-efficiency [SMART ENERGY SAVING] feature.
- [Low]: Saves energy using the low-efficiency [SMART ENERGY SAVING] feature.
- [Off]: Disables the feature.
• [Deep Sleep Mode]: When [Deep Sleep Mode] is [On], power consumption is minimized while the monitor is
in standby mode.
- [On]: Enables [Deep Sleep Mode].
- [Off]: Disables [Deep Sleep Mode].
• [Power LED]: When the [Power LED] function is turned on, it operates as follows:
- On mode: Light up
- Sleep Mode (Standby Mode): Blinking
- Off mode: Off
• [Automatic Standby]: If there is no operation on the monitor for a certain period of time, the monitor will
automatically switch to standby mode.
• [Input Compatibility Version] : Set Input Compatibility Version to the same version as the connected external
device.
- In case of DisplayPort and USB-Cset to 1.4 orover to use the HDR function.
- In case of HDMI input, set to 2.0 or over to use the HDR function.
• [Buzzer]: This feature lets you set the sound generated from Buzzer when your monitor powers on.
• [User-defined Key]: You can customise the main menu to access your preferred menu easily.
- [PBP]: Displays the screens of two input modes on one monitor.
- [Picture Mode]: Sets the picture mode.
- [KVM Switch]: Select the USB upstream cable connection port to use USB hub of the monitor.
• [OSD Lock] : This feature disables the configuration and adjustment of menus.
All features are disabled except [Brightness], [Auto Brightness], [Contrast] and [Volume] on [Quick Settings],
menus of on [Input], and [OSD Lock] and [Information] of [General].
• [Information] : The following display information will be shown; [Total Power On Time], [Resolution].
• [Reset to Initial Settings] : Returns to the default settings.