Need help?Do you have a question about the LG 29WN600-W and is the answer not in the manual?
General| HD type | UltraWide Full HD |
|---|---|
| Pixel pitch | 0.2628 x 0.2628 mm |
| Screen shape | Flat |
| Display diagonal | 29 \ |
| Display resolution | 2560 x 1080 pixels |
| Display technology | LED |
| Native aspect ratio | 21:9 |
| Maximum refresh rate | 75 Hz |
| sRGB coverage (typical) | 99 % |
| Display number of colors | 16.78 million colors |
| Display brightness (typical) | 250 cd/m² |
| Supported graphics resolutions | 2560 x 1080 |
| Flicker-free technology | Yes |
| Cable lock slot | - |
| Panel mounting interface | 100 x 100 mm |
| DisplayPort version | 1.4 |
| RMS rated power | 7 W |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.3 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 24.8 W |
| Package depth | 159 mm |
| Package width | 822 mm |
| Package height | 413 mm |
| Package weight | 6600 g |
| Product color | Silver |
| Market positioning | Home |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth (with stand) | 209.4 mm |
|---|---|
| Height (with stand) | 406.6 mm |
| Weight (with stand) | 4700 g |
| Depth (without stand) | 76.9 mm |
| Width (without stand) | 688.1 mm |
| Height (without stand) | 313.2 mm |
| Weight (without stand) | 4200 g |
Highlights critical safety components in LCD monitors requiring manufacturer parts for replacement to prevent hazards.
Guidelines for safely handling LCD modules: proper mounting, avoiding pressure, and ESD protection.
General safety guidelines for servicing: power disconnection, testing, cleaning, and avoiding modifications.
Risks of static electricity to semiconductor components and techniques to prevent damage during handling.
Best practices for soldering: tool selection, tip temp, solder type, and cleaning for reliable connections.
Step-by-step instructions for removing and replacing ICs on circuit boards, including specific techniques.
Methods for repairing damaged copper patterns on circuit boards using jumper wires to ensure circuit integrity.
Details characteristics of the applied LCD module: maker, type, display area, pixel pitch, and interface.
Recommended timing parameters for HDMI input: preset modes and corresponding horizontal/vertical frequencies.
Details supported timing modes for HDMI and DisplayPort, including VF and HF ranges for various resolutions.
Step-by-step instructions to access the Service Menu (SVC mode) using monitor controls and joystick.
Procedure for updating firmware (F/W) by connecting a Mstar Jig to the monitor and PC.
To Next Page
