LG 29WP60G User Manual (English)

Other manuals for LG 29WP60G

Quick Setup Guide8 pages

Manual11 pages

Questions and Answers:

E
erica10Jul 28, 2025
Why is nothing displayed on my LG 29WP60G Monitor screen?
- S
  smithchristinaJul 28, 2025
  There could be several reasons why nothing is displayed on your LG monitor's screen. First, ensure the power cord is correctly plugged into the power outlet and that the power cable connection is secure, then press the power button. Also, verify that the connected input is enabled in the monitor's settings under the Input section. This issue can also occur if the signal cable between your PC and the monitor is either missing or disconnected, so check the cable and reconnect it securely. Finally, the signals transferred from the PC (graphics card) might be out of the monitor's horizontal or vertical frequency range. Refer to the Product Specification section of the manual to set the appropriate frequency.
C
Carla DoyleAug 2, 2025
Why is there no sound from the headphone port on my LG Monitor?
- S
  Sandra SaundersAug 2, 2025
  If there is no sound from the headphone port on your LG monitor, first ensure that the headphone port connections are made properly. If the connections are correct, try increasing the volume using the joystick. Also, make sure to set the audio output of the PC to the monitor you are using. Note that the settings may differ depending on the operating system you use.
B
Brandon GlassAug 6, 2025
What to do if my LG Monitor screen display is unstable and shaky?
- J
  John LongAug 7, 2025
  If your LG monitor's screen display is unstable or shaky, or if images displayed on the monitor leave shadow trails, and the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Try changing the resolution to 1080p or the recommended resolution. Also, not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.
L
lisapatelAug 11, 2025
How to fix an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message on my LG 29WP60G?
- B
  brendacollierAug 11, 2025
  If you see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message, be sure to install the display driver from the LG website. Also, make sure to check if the graphics card supports Plug and Play function.
I
ichambersAug 16, 2025
What to do if image sticking occurs even when the LG 29WP60G is turned off?
- J
  James RamseyAug 17, 2025
  Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image. To extend the lifetime of your LG monitor, use a screensaver.
S
Steven JohnsonAug 22, 2025
How to enable disabled features on LG Monitor?
- E
  Eric DunnAug 22, 2025
  If some features are disabled on your LG monitor, the OSD might be locked. To enable the features, disable OSD Lock in the General settings.

LG 29WP60G Specifications

General

Screen Size	29 inches
Resolution	2560 x 1080
Panel Type	IPS
Aspect Ratio	21:9
Refresh Rate	75Hz
Response Time	5ms (GTG)
Brightness	250 cd/m²
Color Gamut	sRGB 99%
Ports	1 x HDMI, 1 x DisplayPort, 1 x Headphone Out
AMD FreeSync	Yes
Contrast Ratio	1000:1
Viewing Angle	178° (R/L), 178° (U/D)
VESA Mount	100 x 100 mm