12
ENG
ENGLISH
ASSEMBLING AND PREPARING
Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
Remove the stand before installing the TV on a wall mount by performing the stand attachment in
reverse.
NOTE
When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
Make sure that the screws are fastened completely. (If they are not fastened securely enough, the
TV may tilt forward after being installed.)
Do not fasten the screws with too much force; otherwise they may be worn out and get loosened.
CAUTION
1
For 22CS410
Stand Body
2
P4 x 16
2 EA
3
Stand Base
To Next Page
Loading...
