31
ENG
ENGLISH
CUSTOMIZING TV SETTINGS
Basic Image Options
Setting Description
Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness Adjusts the base level of the signal in the picture.
Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color Adjusts intensity of all colors.
Tint Adjusts the balance between red and green levels.
Advanced Customizes the advanced options.
Picture Reset Restores the options of each mode to the factory default.
Advanced Image Options
Setting Description
Dynamic Contrast Adjusts the contrast to keep it at the best level according to the brightness of the screen.
The picture is improved by making bright parts brighter and dark parts darker.
Dynamic Color Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue,
saturation and luminance so that red, blue and green white look more vivid.
Noise Reduction Reduces screen noise without compromising video quality.
Black Level Sets black level of the screen to proper level. This function is available in the following
modes: RF, AV or HDMI.
»
Low: The reflection of the screen gets darker.
»
High: The reflection of the screen gets brighter.
Film Mode Makes video clips recorded in film look more natural by eliminating judder effect.
DVD and Blu-ray movies are filmed at 24 frames per second (fps).
This feature operates only in RF or AV mode 480i/576i.
Color Temperature Set to warm to enhance hotter colors such as red, or set to cool to enhance cooler colors
such as blue.
Red/Green/Blue: The adjustment range is -30 to +30.
To Next Page
Loading...
