PICTURE CONTROL
The following selection will allow you to adjust the pic-
ture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs).
•
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there
is noise in original Picture, You
can see the noise at the edge.
•
When your TV receives a wide screen signal it will auto-
matically change to the picture format broadcast.
•
When TV receives the wide screen signal,it will lead you
to adjust the picture horizontally or vertically, in a linear
proportion,to fill the entire screen fully.
4:3 and 14:9 video is supported in full screen without
any video distortion through DTV input.
You can watch the screen in various picture formats; 16:9, Just Scan,
Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed
image may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
button.
This function works in the following signal.
Just Scan
Original
Full Wide
• You can also adjust in the
menu.
• For Zoom Setting, select , and
in Ratio Menu. After com-
pleting Zoom Setting, the display goes
back to Q.Menu.
1
Select .
2
Select the desired picture format.
To Next Page
Loading...
Need help?
General
