PICTURE CONTROL
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusting the backlight when setting the brightness of the set is recommended.
Adjusts the signal level between black and white in the picture. You may use Contrast when the bright
part of the picture is saturated.
Adjusts the base level of the signal in the picture.
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Adjusts intensity of all colours.
Adjusts the balance between red and green levels.
Adjust to left direction to make a picture reddish or adjust to right direction to make a picture bluish.
•
Press the button to return to normal TV viewing.
• Press the button to move to the previous menu screen.
•
- The electricity consumption is reduced by
up to 60 %.
- The black brightness is reduced. (As the
black has greater depth, you can enjoy a
better quality definition.)
- You can adjust brightness with maintaining
original signal resolution.
► You cannot adjust colour, sharpness and tint in the RGB-PC/HDMI-PC mode.
► When the is selected, you can select , , ,
, or
1
Select .
2
Select .
3
Select ,, ,
or .
4
Select , ,
, ,
or
.
5
Make appropriate adjustments.
OK OK
Move Move
● Aspect Ratio : 16:9
● Energy Saving : Off
● Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour 70
● Aspect Ratio : 16:9
● Energy Saving : Off
● Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour 70
PICTURE PICTURE
● Picture Mode : Standard ● Picture Mode : Standard
►
►
►
►
Vivid
Standard
Cinema
Sport
Game
Expert1
Expert2
Standard
►
►
To Next Page
Loading...
Need help?
General
