23
PREPARATION
STAND INSTRUCTIONS
(For 26/32/37/42/47/55LE5300, 32/42/47/55LE4600, 32/42LE4300)
ᯫ
Image shown may differ from your TV.
INSTALLATION
!
NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
2
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
3
Assemble the TV as shown.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
4
Assemble the part of the STAND
REAR COVER with the TV.
5
Install the 4 screws into the holes shown.
STAND BASE
STAND BODY
STAND REAR
COVER
M4 x 20
M4 x 16M4 x 14
For 26LE5300
For 26LE5300
Other models
M4 X 22(For 32LE5300,
32/42/47/55LE4600 , 32LE4300)
M4 X 24(For 37/42LE5300 , 42LE4300)
M4 X 26 (For 47/55LE5300)
To Next Page
Loading...
