EasyManua.ls Logo

LG 32LE5900 - Page 270

LG 32LE5900
289 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
206
APPENDIX
APPENDIX
12. Remote control lock mode (Command: k m)
To lock the front panel controls on the monitor and
remote control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Ack
Data 00 : Lock off 01 : Lock on
* If you are not using the remote control, use this
mode.
When main power is on/off, external control lock is
released.
* In the standby mode, if key lock is on, TV will not
turn on by power on key of IR & Local Key
.
[m][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off when con-
trolling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Ack
Data 00 : OSD off 01 : OSD on
[l][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
Data Red : 00 to Green : 64
*
Refer to ‘Real data mapping 1’. See page 207.
[k][j][ ][Set ID][ ][Data][Cr]
Ack
[j][ ][Set ID][ ][OK/NG][Data][x]
To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
10. Sharpness (Command: k k)
Data
Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 207.
[k][k][ ][Set ID][ ][Data][Cr]
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
15. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 207.
[k][t][ ][Set ID][ ][Data][Cr]
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
14.
Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 207.
[k][s][ ][Set ID][ ][Data][Cr]
Ack
[s][ ][Set ID][ ][OK/NG][Data][x]
13. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 207.
[k][r][ ][Set ID][ ][Data][Cr]
Ack
[r][ ][Set ID][ ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)
To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 207.
[x][u][ ][Set ID][ ][Data][Cr]
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]

Table of Contents

Related product manuals