ENGLISH
27
NICAM Reception
If the TV is equipped with a receiver for NICAM reception, high quality
NICAM (Near Instantaneous Companding Audio Multiplex) digital sound
can be received.
Sound output can be selected according to the type of broadcast
received.
1 When
NICAM mono is received, you can select NICAM MONO or
FM MONO.
2 When
NICAM stereo is received, you can select NICAM STEREO or
FM MONO.
If the stereo signal is weak, switch to FM MONO.
3 When
NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or FM MONO.
SETUP settings
1 Press SETTINGS and the Navigation buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to the setting or option you
want and press
OK .
3 When you return to the previous menu, press
BACK.
* Image shown may di er from your TV.
Auto Tuning
Manual Tuning
Programme Edit
SETUP
Move OK
TIME settings
1 Press SETTINGS and the Navigation buttons to scroll to TIME.
2 Press the Navigation buttons to scroll to the setting or option you
want and press
OK .
3 When you return to the previous menu, press
BACK
* Image shown may di er from your TV.
ꔈClock
ꔈOff Time
: Off
ꔈOn TIme
: Off
ꔈSleep Timer : Off
TIME
Move OK
The available time settings are described in the following.
Setting Description
Clock
Sets the time.
Off Time /
On Time
Sets the time to turn on or o the TV
automatically. To use this function, you should
set the current time and date in advance.
NOTE
• If you do not press any button within 2
hours after the TV turns on by the
On Time
feature, the TV enters the Standby mode
automatically.
• If you set both
Off Time and On Time
features to the same time, the Off Time
feature overrides the On Time feature.
Sleep Timer
Sets the length of time until the TV to turns o .
When you turn the TV o and turn it on again,
the Sleep Timer feature will be set to o .
To Next Page
Loading...
