ENGLISH
29
Setting Description
Factory
Reset
Customizes the TV settings to suit your
preference. The initial setup screen will appear
when you turn on the TV for the rst time.
Mode
Setting
Selecting the Standard or Store Demo
environment. Choose the setting mode you
want.
Home Use
Selects it for the Home
environment.
Store Demo
Selects it for the retail
environment.
About This
TV
LGE Open Source Software Notice
Troubleshooting
Cannot control the TV with the remote control.
• Check the remote control sensor on the product and try again.
• Check if there is any obstacle between the product and the remote
control.
• Check if the batteries are still working and properly installed (
to
, to ).
No image display and no sound is produced.
• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns o suddenly.
• Check the power control settings. The power supply may be
interrupted.
• Check if the
Automatic Standby (Depending on model) / Sleep
Timer / Off Time is activated in the TIME settings.
• If there is no signal while the TV is on, the TV will turn o
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’ is
displayed.
• Turn the TV o /on using the remote control.
• Reconnect the HDMI cable.
• Restart the PC with the TV on.
To Next Page
Loading...
