LG 32LF520 Series - Lock Settings; Option Settings

28
ENGLISH
LOCK settings
1 Press SETTINGS and the Navigation buttons to scroll to LOCK.
2 Press the Navigation buttons to scroll to the setting or option you
want and press
OK .
3 When you return to the previous menu, press
BACK.
* Image shown may di er from your TV.
ꔈLock System
ꔈKey Lock : Off
: Off
ꔈ Block programme
ꔈ Parental Guidance : Blocking Off
ꔈ Input Block
LOCK
Move OK
ꔈSet Password
Conrm
New
Close
The available lock settings are described in the following.
Setting Description
Set Password
Sets or change the TV password.
The initial password is set '0000'.
Lock System
Activates or deactivates the lock system.
On/O Lock the settings of Lock
System.
Block Programme To set locked special
programme
Parental Guidance Setting viewable age
Input Block Opened or closed input
source : AV, Component,
HDMI1, HDMI2
Key Lock
The operation of TV side controls will be locked
except power key.
OPTION settings
1 Press SETTINGS and the Navigation buttons to scroll to OPTION.
2 Press the Navigation buttons to scroll to the setting or option you
want and press
OK .
3 When you return to the previous menu, press
BACK.
* Image shown may di er from your TV.
ꔈDisability Assistance
ꔈStandby Light : On
ꔈFactory Reset
ꔈMode Setting : Store Demo
ꔈAbout This TV
OPTION
Move
OK
ꔈLanguage (Language)
The available option settings are described in the following.
Setting Description
Language
Selects a desired language.
Disability
Assistance
Hard of Hearing ON: Hard of Hearing
Subtitle is selected (Close
caption) automatically.
OFF: function disabled.
Audio Description ON: AD is also provided
as Audio in addition to
the basic program, which
includes the AD. (Second
audio program)
OFF: Only provides basic
Audio. (Main audio
program)
Volume: 0~15
0: Same as Basic Audio
Volume of AD Stream.
+ 15: larger than the
default Audio Volume of
AD Stream.
- 15: it becomes AD
volume Mute status.
Standby
light
ON Power LED is “ON” to
indicate the TV at Standby
condition.
OFF No indication, Power LED
is “OFF” while the Standby
condition.