ENGLISH
6
TABLE OF CONTENTS
2 SafEty INStructIoNS
5 LIcENSES
5 oPEN SourcE SoftWarE NotIcE
6 taBLE of coNtENtS
7 INStaLLatIoN ProcEdurE
7 aSSEMBLING aNd PrEParING
7 Unpacking
9 Parts and Buttons
10 Lifting and moving the TV
11 Setting up the TV
11 - Attaching the stand
12 - Mounting on a table
13 - Tidying cables
14 - Mounting on a wall
15 MaKING coNNEctIoNS
15 Connecting to an antenna or cable
16 Connecting to a HD receiver, DVD Player or VCR
16 - HDMI Connection
17 - Connecting to a mobile phone
18 - Component Connection
19 - Composite Connection
20 Connecting a PC
20 - HDMI Connection
21 Connecting to an Audio System
21 - Digital Optical Audio Connection
22 Connecting a USB Device
23 rEMotE coNtroL
25 uSING tHE uSEr GuIdE
26 SPEcIfIcatIoNS
28 MaINtENaNcE
28 Cleaning Your TV
28 - Screen, frame, cabinet and stand
28 - Power cord
28 trouBLESHootING
28 EXtErNaL coNtroL dEVIcE SEtuP
taBLE of coNtENtS
Image shown may differ from your TV.
Your TV’s OSD (On Screen Display) may differ
slightly from that shown in this manual.
The available menus and options may differ from
the input source or product model that you are
using.
New features may be added to this TV in the
future.
The TV can be placed in standby mode in order to
reduce the power consumption. And the TV should
be turned off if it will not be watched for some
time, as this will reduce energy consumption.
The energy consumed during use can be
significantly reduced if the level of brightness of
the picture is reduced, and this will reduce the
overall running cost.
NOTE
To Next Page
Loading...
