To Next PageTo Next Page
Need help?Do you have a question about the LG 32LS3400-DA and is the answer not in the manual?
General| Screen Size | 32 inches |
|---|---|
| Display Type | LED |
| Resolution | 1366 x 768 |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Refresh Rate | 60Hz |
| Aspect Ratio | 16:9 |
| Audio Output | 10W x 2 |
Key safety guidelines and warnings for service personnel.
General recommendations for safe servicing procedures and component handling.
Procedure for checking AC leakage current for safety.
Defines the scope of application for this service manual.
Specifies the environmental and power conditions for testing.
Outlines the procedures and standards for product testing.
Lists various screen sizes supported by the chassis.
Specifies the aspect ratio of the display.
Details the LCD modules used in the TV models.
Conditions for operating the TV.
Conditions for storing the TV.
Specifies the acceptable input voltage range.
Details the power consumption for different models.
Provides physical dimensions for LCD modules.
Lists supported Component (Y, Pb, Pr) input signal formats.
Details supported RGB input signal formats and EDID data.
HDMI EDID data for PC input modes.
HDMI EDID data for DTV input modes.
Lists HDMI input formats supported for 3D display.
Specifies the scope of the adjustment instructions.
Details the meaning of designations used in adjustments.
Procedure for checking and verifying the main PCB.
Steps for Automatic Program Control after manual insertion.
Instructions for downloading the boot file.
Steps for downloading software updates via USB.
How to adjust tool options after software download.
Steps for Analog-to-Digital Converter calibration.
Procedures for verifying TV functions.
Procedures for managing MAC addresses.
Procedures for inspecting LAN connectivity.
Testing LAN port connectivity using ping.
Procedures for downloading model and serial number information.
Preparatory steps before assembly line adjustments.
Guidelines for using auto-control interfaces during adjustments.
RS-232C commands for auto-adjusting parameters.
Procedure for manual white balance adjustment using remote control.
Writing EDID data for RGB interface.
Writing EDID data for HDMI interface.
Overview and management of EDID data.
EDID data table for Analog RGB FHD signals.
EDID data table for Analog RGB HD signals.
Detailed steps for performing GND and Hi-pot tests.
Troubleshooting flowchart for power-related issues.
Troubleshooting flowchart for raster-related issues.
Troubleshooting for Component signal input issues.
Troubleshooting for HDMI signal input issues.
Troubleshooting for AV video signal input issues.
Troubleshooting for TV RF signal input issues.
Steps to diagnose and resolve no sound issues.
Test points for the CI slot interface.
Test points for the SCART interface.
Test points for the headphone jack.
Test points for the S2 interface.
Schematics for various voltage regulator circuits.
Schematics for different HDMI port configurations.
