24 ASSEMBLgNG AND PREPARING
For CS530, CS560 series
4 EA
M4 x 20
Stand Bod_
Front
Stand Base
- _ CAUTION
* When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
f
_ii_4EA 0
M4 x 20
J
- @ NOTE
* Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
F _, CAUTION
* Make sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
* Do not fasten the screws with too much
force; otherwise they may be worn out and
get loosened.
To Next Page
Loading...
