18
ENG
ENGLISH
ASSEMBLING AND PREPARING
Not using the Desk Type Stand
Image shown may differ from your TV.
Only 26/32LK33**, 32/42LK43**, 32/37/42LK45**,
42/47/55LK53**
1
Push the supplied protection cover into the
opening at the bottom of the TV until clicking
sound.
Protection cover
Only 22LK33**
1
Lay the TV with the screen side down on a flat
surface.
2
Remove the 2 screws and pull the stand away
from the TV.
3
Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
This will protect the opening from accumulating
dust and dirt.
Protection cover
Mounting on a table
Image shown may differ from your TV.
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2
Connect the power cord to a wall outlet.
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
(Except for 22LK33**, 19/22/26LV25**,
22/26LV55**)
Swivel 20 degrees to the left or right and
adjust the angle of the TV to suit your view.
NOTE
2020
To Next Page
Loading...
