What to do if my LG 32LX770M LED TV turns off suddenly?
If your LG LED TV turns off suddenly, it could be due to a few reasons. First, the power supply might be interrupted, so check the power control settings. Also, the Timer Power Off or Sleep Timer feature might be activated in the TIMERS settings. Finally, if there's no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.
Why is my LG TV remote not working?
There are several reasons why your LG TV remote might not be working. First, ensure the remote is set to TV Mode using the MODE key. Then, aim the remote directly at the IR receiver on the TV from a closer distance, ensuring nothing is blocking the path. Dim the room light if there's too much light. Check and replace the batteries, making sure they are inserted with the correct polarity (+ and -). If applicable, connect the MPI cable to the MPI device. Finally, verify that the remote IR codes match the settings in your TV; if you're using an Installer Remote, ensure it's compatible and contact your LG representative if needed.
Why my LG 32LX770M LED TV remote control is not working?
If you cannot control your LG LED TV with the remote, there might be a simple fix. First, check if anything, like tape, is covering the receiver. Then, make sure there are no obstacles between the remote and the TV. Finally, try replacing the batteries in the remote with fresh ones.
What to do if my LG TV has no picture?
If your LG TV has no picture, start by ensuring the TV is turned ON. Check that the antenna or cable is securely connected to the TV. Verify all connections to the TV are correct. If applicable, connect the MPI cable to the MPI device. If you're tuned to an encrypted program, try switching to another channel. Lastly, adjust the Installer Menu settings to ensure the correct tuning band is selected.
Why does my LG TV have sound problems?
If your LG TV has a normal picture but poor or no sound, first, make sure the audio isn't muted by pressing the MUTE button or using the Volume Up key. If that doesn't work, try changing the channel in case there's a broadcast problem. Also, check that Installer Menu items 020 FEATURE LEVEL and 027 HOSPITAL MODE are set as required. If applicable, select TV Speaker in the Audio Menu.
How to fix no channels on LG TV after Express Script?
If no channels are present on your LG TV after running the Express Script, it's likely that Auto Tuning was not run. Refer to the Express Script procedure. Auto Tuning must be run in order for the channel lineup to be populated. To reactivate the Express Script, restore the TV to a factory default condition.
What to do if my LG 32LX770M LED TV has no image and sound?
If your LG LED TV shows no image and produces no sound, try these steps: Check if the TV is turned on. Verify that the power cord is securely connected to a wall outlet. To ensure the wall outlet is functioning correctly, connect other products to it.
Why can't I enter channel numbers directly on my LG TV?
If you cannot directly enter a channel number on your LG TV, it could be due to the TV being in Pass-through Mode with Installer Menu item 028 CH. OVERIDE set to 0 (disabled). To fix this, set CH. OVERIDE to 1 to allow direct keypad entry to all channels. Alternatively, if the TV is in FTG Mode, the channel you're trying to enter may not be included in the FTG Channel Map. In this case, make changes to the FTG Channel Map using the FTG File Manager or the FTG Device Configuration Application.
Instructions for cleaning TV surfaces, power cord, and general care.
Precautions for moving the TV to prevent damage or injury.
Details on supported television broadcast systems.
Information on VHF, UHF, DTV, and CATV frequency bands.
Specifies the impedance for external antenna connections.
Operating and storage temperature and humidity limits.
Technical details for the wireless LAN and Bluetooth module.
Details on USB, RS-232C, and phone jack connections for control.
Baud rate, data formats, and transmission protocols for device control.
Detailed list of commands for controlling TV functions via serial interface.
Commands for power, picture, audio, channel tuning, input, and 3D.
General| Screen shape | Flat |
|---|---|
| Display diagonal | 31.8 \ |
| Display brightness | - cd/m² |
| Native aspect ratio | 16:9 |
| LED backlighting type | Edge-LED |
| Contrast ratio (dynamic) | 1000000:1 |
| Contrast ratio (typical) | 1200:1 |
| Display diagonal (metric) | 80 cm |
| Screen format adjustments | 4:3, 16:9, Zoom |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Display refresh rates supported | 60 Hz |
| Motion interpolation technology | - |
| 3D | No |
| RJ-12 ports quantity | 1 |
| Annual energy consumption | 99 kWh |
| Tuner type | Analog & digital |
| Analog signal format system | NTSC |
| Digital signal format system | ATSC |
| Sound modes | Game, Movie, Music, News, Sports, Standard |
| Audio decoders | Dolby Digital |
| RMS rated power | 10 W |
| Number of speakers | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Audio formats supported | AAC, AC3, EAC3, MP3, PCM |
| Image formats supported | JPG |
| Picture processing technology | LG Triple XD Engine |
| AC input voltage | 110 V |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 56 W |
| Package depth | 114.3 mm |
| Package width | 800.1 mm |
| Package height | 510.54 mm |
| Package weight | 6622.45 g |
| Certification | UL, FCC, cUL, NOM |
| Sustainability certificates | RoHS, ENERGY STAR |
| Cables included | AC |
| Panel mounting interface | 200 x 200 mm |
Weight and Dimensions| Depth (without stand) | 55.88 mm |
|---|---|
| Width (without stand) | 734.06 mm |
| Height (without stand) | 436.88 mm |
| Weight (without stand) | 5307.03 g |
To Next Page
