LG 32LY770M - USB Configuration

21
206-4271
EZ-Manager Wizard (Cont.)
USB Conguration
The TV Manager / USB Download Menu provides options that enable you to download
conguration or software les individually from a USB memory device to the TV. You can also use
the Ez Download utility available from the menu to select one of each le type to be downloaded
at one time using one process.
Each of the TV Manager / USB Download Menu functions requires that you have the appropriate
le(s) loaded on a USB memory device. If you wish to perform a software update or download a
splash screen image from the TV Manager / USB Download Menu, the software update/image
le(s) must be stored in a folder named “LG_DTV” in the root directory of the USB memory device.
TLX les should simply be stored in the root directory of the USB device.
The procedure below assumes the desired le(s) is/are already loaded onto the USB device. For
further information on TV Manager / USB Download Menu functions and le requirements, and/or
for information on creating TLX les, refer to the appropriate section(s) in this document.
Before You Begin
• If you intend to use the Zoning feature(s) on this TV, make sure to assign the appropriate TV
Zone # and/or Wi-Fi Zone # in the EZ-Manager’s Zones, Label, and Room Number screen
BEFORE continuing with USB Conguration. See “TV Conguration Options” on page 15 for
further information.
• Ensure the USB device to be used has been formatted with FAT format.
• When creating les to be downloaded, avoid using special characters (?, &, @, etc.) in lenames.
• Refer to “Ez Download Utility” on pages 31 to 34 for further information on the Ez Download utility.
• Refer to “Custom Master TV Setup” on pages 46 to 48 for information on creating a TLX file for
cloning purposes, and/or refer to “Creating an FTG Conguration File” on pages 59 to 60 for
information on creating a FTG Conguration (.tlx) le for FTG Mode via CPU conguration.
• See Reference section, “Downloading a Splash Screen Image using a USB Memory Device,” for
splash screen image guidelines.
• See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further
information on software updates.
(Continued from previous page)
When the Pro:Centric conguration is complete, an EZ-Manager Conguration Complete screen
(see example on page 18) is displayed, and after 10 seconds, the wizard exits, and the TV turns
OFF.
Note: With the EZ-Manager Conguration Complete screen on display, you can also manually turn
off or reboot the TV. If desired, select TURN OFF or REBOOT, respectively, and then press OK on
the Installer Remote.