LG 32TNF5J-B.AUS User Manual (English)

Questions and Answers:

M
michael52Sep 6, 2025
How to fix multi-touch not responding on LG 32TNF5J-B.AUS?
- M
  Maurice NelsonSep 7, 2025
  If multi-touch is not responding on your LG Digital Signage: * Make sure that you use a content that supports Multi-touch point. The content played (e.g. Flash Player, Paint, etc.) may not support Multi-touch points. * Remove the USB cable and connect it again in 10 seconds. * Run the content (e.g. Flash Player, Paint, etc.) again. * Restart your PC. * On the edge of the touch screen, multi-touch may work unstably. * If the interval between two touches is too short, a touch error may occur.
C
Caitlin MooreSep 6, 2025
How to correct touch location on LG Digital Signage?
- E
  Eric SteeleSep 6, 2025
  If the location of a touch does not correspond to the touch coordinates on your LG Digital Signage, this may occur when the touch screen is not calibrated properly. Change your tablet PC settings.
A
Angela LeblancSep 5, 2025
How to fix PC BIOS configuration screen not displayed correctly on LG 32TNF5J-B.AUS Digital Signage?
- L
  Laura WatkinsSep 5, 2025
  On some PCs, the BIOS configuration screen may not display correctly because the atypical aspect ratio is not supported before the graphics card driver is configured. To access the PC BIOS configuration screen, please connect a standard aspect ratio (4:3 or 16:9) monitor, then perform the BIOS configuration.
M
Michael AdamsSep 4, 2025
How to increase low sound on LG Digital Signage?
- T
  Timothy SweeneySep 4, 2025
  To increase the sound if it is too low on your LG Digital Signage, adjust the volume of the product or external device.
M
Mary RiversSep 3, 2025
How to fix dull sound on LG Digital Signage?
- M
  Michael EdwardsSep 3, 2025
  To fix dull sound on your LG Digital Signage, select the appropriate equalizer sound.
J
Jenny GonzalezAug 23, 2025
Why won't my LG 32TNF5J-B.AUS turn on?
- G
  garzajosephAug 25, 2025
  If your LG Digital Signage isn't powering on, here are a few things to check: * Ensure the power cord is securely plugged into the power outlet. * If operating in below-zero temperatures, allow up to one hour for the enclosure to warm up internally. * For models with a circuit breaker, verify it's properly connected and the switch is set to the 'on' position (red). * Try disconnecting and reconnecting the AC adapter, after cleaning the contacting port. * When using POE, make sure that the LAN cable is not damaged. * Do not connect the AC adapter when using POE power.
K
Kelly GentrySep 2, 2025
How to fix horizontal noise or blurred characters on LG 32TNF5J-B.AUS?
- T
  Tiffany RiveraSep 2, 2025
  To correct horizontal noise or blurred characters on your LG Digital Signage, if using a D-Sub analog signal, press the button on the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu.
P
Peter BrownSep 1, 2025
How to fix stripes appearing in the background of LG 32TNF5J-B.AUS Digital Signage?
- C
  Cindy GeorgeSep 1, 2025
  To address stripes appearing in the background of your LG Digital Signage, if using a D-Sub analog signal, press the button on the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu.
M
Megan SmithAug 31, 2025
How to fix no sound output on LG 32TNF5J-B.AUS Digital Signage?
- R
  rbrooksSep 1, 2025
  If there is no sound output from your LG Digital Signage: * Ensure the audio cable is properly connected. * Adjust the volume of the product or external device. * Verify that the sound settings are configured correctly.
N
Neil CruzAug 31, 2025
Why is my LG 32TNF5J-B.AUS screen's brightness dark?
- W
  wayne40Aug 31, 2025
  If your LG Digital Signage screen appears dark: * Adjust brightness and contrast again. * Backlight may need repair. * If the internal temperature of the enclosure rises, the screen’s brightness may darken. Clean the heat exchanger or filter in the enclosure periodically.