- 12 -
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Before AV ADC Calibration, should be
executed the "Tool option 1"
5. Select method of Tool option 1
5.1 Press ADJ Key in the Adjust remocon
5.2 Select "Tool option 1" by using
/ (CH+/-) key, and press
(ENTER).
5.3 Select "Maker" by using
/ (CH+/-) key, and change the
module maker and. applied module classification by using
/
(VOL+/-).
5.4 Select "Inch" by using
/ (CH+/-) key, and change the
module according to the inch of model .
5.5 Select "Tool" by using
/ (CH+/-) key, and change the tool
name according to the model .
6. ADC Calibration
=> Caution : - System control RS-232 Host should be "PC" for
adjustment.
- Before AV ADC Calibration, execute the "Module
selection"
6.1 Adjustment of RF / AV / S-VIDEO
√ Required Equipments
• Remote controller for adjustment.
• MSPG-925FS Pattern Generator (Which has Video Signal:
7 Color Bar Pattern shown in Fig. 1).
=> Model: 202 / Pattern: 65
6.1.1 Method of Auto RF/AV/S-VIDEO Color Balance (PAL_BGDHI).
1) Input the Video Signal: 7 Color Bar signal into AV3.
2) Set the PSM to Dynamic mode in the Picture menu.
[Fig.1 Color Bar Signal]
3) Press IN-START key on R/C for adjustment.
[Fig.2 Color Bar Signal]
4) Press the
(Vol.+) key to operate the set, then it becomes
automatically.
5) Auto-RGB OK means the adjustment is completed.
6.2. Adjustment of Component
√Required Equipments
• Remote controller for adjustment.
• MSPG-925FS Pattern Generator. (Which has 720p/50Hz
YPbPr output Pattern shown in Fig. 2)
-> Model : 215 / Pattern : 65
6.2.1 Method of Auto Component Color Balance
1) Input the Component 720p/50Hz 7 Color Bar (MSPG-
925FS model:215, pattern:65) signal into Component.
2) Set the PSM to Dynamic mode in the Picture menu.
[Fig.3 Color Bar Signal]
3) Press the IN-START key on R/C for adjustment.
4) Press the
(Vol.+) key to operate the set , then it
becomes automatically.
[Fig.4 Color Bar Signal]
5) Auto-RGB OK means the adjustment is completed.
ADC AV Component RGB-PC
MSPG925FS PALJ Model:215 (720P)
INPUT SELECT AV3 Pattern:65 Model: 60
Model:202(PAL-BGDHI) *720P/50Hz
(1024*768 60Hz)
7 Color Bar Pattern: 65
Pattern: 65
*PAL 7 Color Bar
To Next Page
Loading...
