To Next Page

To Previous Page

ENGLISH

NOTE

• [SMART ENERGY SAVING]

- The value of energy saving data may differ depending on panel and panel suppliers.

- If you select the option of [SMART ENERGY SAVING] is [High] or [Low], monitor luminance become higher

or lower depend on source.

• [HDMI ULTRA HD Deep Color]

- To use [HDMI ULTRA HD Deep Color], turn this function on.

- If the connected device does not support Deep Color, the screen or sound may not work properly. In this

case, set this function to off.

• [Thunderbolt OUT]

- When daisy-chaining two or more monitors, the [Thunderbolt OUT] menu of all connected monitors must

be set to ON.

TROUBLESHOOTING

Nothing is displayed on the screen.

• Is the monitor's power cord plugged in?

- Check if the power cord is correctly plugged into the power outlet.

• Is the power LED on?

- Check the power cable connection and press the power button.

• Is the power on and the power LED displaying white?

- Check that the connected input is enabled ([Settings] > [Input]).

• Is the [No Signal] message being displayed?

- This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check

the cable and reconnect it.

• Is the power LED blinking?

- If the monitor is in sleep mode, move the mouse, or press any key on the keyboard, to switch the display

on.

- Check if the computer is turned on.

• Is the [Out of Range] message being displayed?

- This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical

frequency range of the monitor. Please see the "PRODUCT SPECIFICATION" section of this manual to set the

appropriate frequency.

Questions and Answers:

Need help?

Do you have a question about the LG 40WP95C-W and is the answer not in the manual?

LG 40WP95C-W Specifications

General