When connecting with an S-Video cable
1. How to connect
Connect the S-VIDEO output of the DVD to the
S-VIDEO input on the set.
Connect the audio outputs of the DVD to the AUDIO
input jacks on the set.
2. How to use
01_Turn on the DVD player, insert a DVD.
01_Select AV1 input source with using the INPUT button on
the remote control.
01_If connected to AV IN2, select AV2 input source.
01_Refer to the DVD player's manual for operating instructions.
When connecting HDMI cable
1. How to connect
m
x
m
z
m
XD
c
m
z
m
c
-0
Connect the HDMI output of the DVD to the
HDMI/DVI IN 1 (DVI) or 2 jack on the set.
No separated audio connection is necessary.
HDMI supports both audio and video.
2. How to use
01_Select HDMI1/DVI or HDMI2 input source with using
the INPUT button on the remote control.
n_Refer to the DVD player's manual for operating instructions.
2S
To Next Page
Loading...
