MANUAL CONFIGURE
If the picture isn't clear after auto adjustment and especial-
ly if characters are still trembling, adjust the picture phase
manually.
This function works in the following mode: RGB-PC, RGB-DT_,
Component 480p/720p/1080i, HDM1480p/720p/1080i.
The Phase, Clock functions work in the following mode:
RGB-PC mode.
Press the MENU button and then use • or • or ^
or v button to select the SCREEN menu.
Press the• or > button and then use• or• or
^ or v button to select Manual config..
Press the• or > button and then use• or• or
^ or v button to select Phase, Clock, H-posi-
tion or V-position.
_ Phase
This function allows you to remove any horizontal
noise and clear or sharpen the image of characters.
_Clock
This function is to minimize any vertical bars or
stripes visible on the screen background. And the
horizontal screen size will also change.
H-position / V-position
This function is to adjust picture to left/right and
up/down as you prefer.
@
@O@
_D
m
m
z
c
-4
m
z
-4
Pressthe _1 or • or < or > button to makeappro-
priate adjustments.
Press the EXIT or RETURN button to return to TV
viewing or press the MENU button to return to the
previous menu.
71
To Next Page
Loading...
