EXTERNALEQUIPMENT SETUP
DVD SETUP
m
x
m
z
m
XD
c
m
z
m
c
-0
When connect+ng Component cable
1. How to connect
Connect the video outputs (Y, PB, PR) of the DVD
the COMPONENT IN VIDEO jacks on the set.
Match the jack colors
(Y = green, PB = blue, and PR= red).
to
Connect the audio outputs of the DVD to the
COMPONENT IN AUDIO jacks on the set.
2. How to use
m Turn on the DVD player, insert a DVD.
m Select Component input source with using the INPUT
button on the remote control.
m Refer to the DVD player's manual for operating instructions.
PB PR
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
24
To Next Page
Loading...
