LCD DV 42LH90
23
February 2010
To remove the LVDS cables CN1 and CN2;
Press in on the two tabs and slowly rock the cable out of the connector.
(Shown by the arrows in Figure above)
(CN1) LVDS
Press In
Pull Out
(CN2) LVDS
Press In
Pull Out
Press In
T
T
-
-
CON Board Removal Board Continued (Unlocking CN1 and CN2 LVDS Ca
CON Board Removal Board Continued (Unlocking CN1 and CN2 LVDS Ca
bles)
bles)
Note: The tabs are fragile, use caution, they may break.