LCD DV 42LH90
28
February 2010
Removing Front Boards (IR Board and Moving LED Board)
Removing Front Boards (IR Board and Moving LED Board)
P100
IR board / Intelligent Sensor
p/n EBR62128101
Moving LED board
(Power LEDs)
p/n EBR61674001
p/n EBR62127501
Key board
Disconnect J1 or P100. Remove
the LED board by lifting up on
the two locking tabs and pull
backwards on the board.
Disconnect P101 and P102.
Note P102 is behind the Power Switch.
Remove the IR board by removing the 1 screw and lift out the board.
P
101
P102
J
1
The Power Switch has
been removed for easier
viewing of connectors and
screws.
P
100
Tab
Tab
To Next Page
Loading...
